Gutter Clutter Buster Extensions fit TIGHTLY by design and will require you to WIGGLE and/or TWIST to get them apart after use.
A List
- Use the right powered vacuum – 6.0 for single story, 6.5 HP models for all others
- Wear safety goggles – don’t get injured by falling debris
- Empty the canister when it reaches half to two thirds full to restore maximum suction to your machine
- Share this great gutter cleaning tool with friends and family!
How to Use the Gutter Clutter Buster gutter cleaning tool
To use your Gutter Clutter Buster start by removing the PAPER filter from your wet dry vacuum
Install the wet filter which is usually a FOAM type of SLEEVE.
PRIOR TO ASSEMBLING THE GUTTER CLUTTER BUSTER EXTENSIONS CONNECTIONS NEED COATED WITH A LIGHT LUBRICANT SUCH AS WD-40, or use automotive or cooking oil.
Start with an EMPTY vacuum canister.
Lay the Gutter Clutter Buster and any needed extensions on the ground and connect them.
Put on safety goggles or eyewear to protect you from any possible falling debris.
Attach the 2.5 inch hose from your vacuum to the end of the tool for single story homes or the last extension for all other uses.
Position your vacuum near where you intend to start working, and turn it on.
Raise the Gutter Clutter Buster up into your gutter.
Changes in your vacuum’s noise make it obvious when that area of your gutters is clear of debris.
Small up and down movements help to collect any compacted debris and pine needles.
Handle any clogs by briefly cutting power until the debris drops, then restart and continue. Some clogs may require hand removal at ground level but this is not usually the case
To maintain the maximum suction power of your vacuum, empty the canister once it is above halfway full.
Once your finished simply empty your vacuum, separate the equipment, store it, and you are done.
If you wish to have a visual inspection, we recommend using a drone for safety reasons
Gutter Clutter Buster LLC 2024
US patent USD622,016S